3

INTRODUCTION

AUDIO ANALOGUE does not take any responsibilities in the following cases:

Whenever the operational procedures related to the use and the maintenance of the equipment as described in this manual are not respected.

Whenever damages to the equipment occur because of fixing and modifications made form non-authorized staff or because of normal deterioration of the system.

No part of this manual can be reproduced by any means, transmitted or copied for private or public use without private authorization from AUDIO ANALOGUE.

The information contained in this manual is related to the data kept by AUDIO ANALOGUE at the moment of the issue o f this publication; AUDIO ANALOGUE has the right to make changes to this document without prior notice.

The equipment has been projected and manufactured according to the Regulations of the Community 89/336/CEE and is marked CE. This equipment can’t be used for different purposes other than those for which it has been manufactured.

AUDIO ANALOGUE does not take any responsibilities for accidents or damages due to improper use of the equipment.

WARNING

Please do respect the safety standards contained in this manual before starting to operate the equipment.

Do not open the equipment. No further interventions than those described in this manual should be made. For technical assistance, please consult a qualified technician or an AUDIO ANALOGUE dealer.

Not respecting the instructions contained in this manual will invalidate the terms and conditions of the guarantee.

NECESSARY PRECAUTIONS FOR SAFETY AND MAINTENANCE

ATTENTION: before starting any operation, use or maintenance of the equipment it is strictly necessary to understand the following manual.

To avoid any accidents or hazards it is necessary to follow the following regulations.

Activate the equipment only prior checking if the installation has been properly made, and if it is related to the instructions contained in this manual.

Avoid installing the equipment in places subjected to extremely high temperatures or humidity. Check that the labels containing information about safety are always visible and in good conditions.

Ensure to not obstruct ventilation, to avoid excessive overheating. The equipment should be kept to a minimal distance of 15 cm from any object and not to place on carpet or other soft surfaces. Also the installation close to radiators or in close environments without ventilation should be avoided.

Do not switch on the equipment until it has not been correctly and completely installed.

Only supply the equipment with the kind of the electric supply as stated on the appropriate label. If in doubts about the kind of supply available, please consult an expert technician for technical assistance.

The equipment needs to be wired to an earth terminal. The external case is metal made; a defective connection with the earth may be dangerous.

In case damages occurs to the supply cable, it should be immediately replaced with the same kind of cable. This operation should be only made prior to disconnecting the main supply.

Do not place objects on the supply cable and check that this is not positioned in way through. The cable should not be knotted or curly.

Replace the fuses always with other of the same kind.

Do not use the equipment close to the water or other liquids. If liquid entered the equipment, the plug should be disconnected from the socket avoiding to touch the metal parts. Competent technical staff should be asked to check the equipment before operating it again.

Do not place recipients containing liquids on the equipment. Even when it is switched off. Keep the equipment far from sources of heat such as the solar light, kitchens, radiators etc… Always unplug the supply cable during rainy weather.

Always Switch off and unplug the supply cable before cleaning the equipment externally.: this operation should be made using a dry and soft cloth. Never use alcohol based cleaning material.

If the amplifier was carried from an extremely cold environment to and extremely hot one, it could create internal condensation, causing possible bad functioning.

If this occurs, please wait for at least an hour before using it again, to allow it to gradually reach room temperature. When not used for long periods, please unplug the equipment.

INSTRUCTIONS TO PUT IT OUT OF SERVICE

Consult qualified staff

Follow the regulations of the current legislation regarding recycling and waste disposal.

Page 2 Page 4
Page 3
Image 3
Audio Analogue SRL STEREO LINE PREAMPLIFIER owner manual Introduction
Page 2 Page 4

STEREO LINE PREAMPLIFIER specifications

The Audio Analogue SRL Stereo Line Preamplifier is a remarkable component engineered for the discerning audiophile, providing a standalone platform that enhances the music listening experience. This preamplifier exemplifies the brand’s commitment to delivering high-quality audio performance through innovative technologies and exceptional craftsmanship.

At the heart of the SRL preamplifier is its dual-mono architecture. This design separates the left and right audio channels to minimize crosstalk and ensure that each channel reproduces sound with pristine clarity. This configuration enables users to enjoy a more immersive and precise audio experience, making it a perfect choice for stereo setups.

One of the standout features of the SRL is its advanced circuit design, which incorporates high-grade components to enhance signal fidelity. The audio circuit employs a low-noise linear power supply, ensuring that the preamplifier operates without the interference of unwanted noise or distortion. This contributes to the overall performance, offering dynamic range and accurate sound reproduction across various audio sources.

The preamplifier supports multiple inputs, allowing users to connect various devices, such as CD players, turntables, and digital sources. Its input selector switch, conveniently positioned on the front panel, makes it easy to transition between sources without compromising sound quality. The balanced and unbalanced output options provide flexibility in integrating the preamplifier into existing audio systems, catering to different equipment configurations.

Another notable characteristic is the meticulously engineered volume control. The SRL features a high-quality potentiometer that facilitates smooth and precise adjustments, giving users absolute control over their listening levels. Additionally, the preamp possesses a robust and elegant chassis design, constructed from sturdy materials that not only ensure durability but also help minimize resonance and vibrations.

Designed with both aesthetics and functionality in mind, the Audio Analogue SRL Stereo Line Preamplifier merges modern technology with timeless style. Its sleek finish and minimalistic interface make it a visually appealing addition to any hi-fi setup. Overall, the SRL preamplifier stands out as a sophisticated device that combines technical prowess with user-friendly features, making it a valuable asset for any serious music enthusiast looking to elevate their listening experience.
Top Page Image Contents