18
TROUBLESHOOTING
Symptom | Cause | Remedy |
Display is off | Power cord incorrectly plugged | Make sure the power cord is correctly |
No sound |
| plugged into the amplifier and into the |
|
| wall outlet |
| Check fuses in the fuse panel (after | |
|
| unplugging the power cord from the |
|
| wall outlet) above the IEC power inlet |
|
| and replace them with new ones of the |
|
| same type |
Display is on | Volume knob completely rotated anti- | Rotate the volume knob clockwise |
No sound | clockwise |
|
| Faulty or incorrectly plugged | Check that the three cords that |
| connectors between frames | connect the frames are correctly |
|
| plugged |
| Power amplifier is off | Turn power amplifier on |
| Faulty or incorrectly plugged | Check cords and their connection |
| connectors between Maestro Line |
|
| Preamplifier and the amplifier |
|
| Faulty or incorrectly selected sound | Check that the sound source is on and |
| source | correctly selected through the ins |
|
| selector |
| Faulty or incorrectly plugged | Check cords and their connection |
| connectors between Maestro Line |
|
| Preamplifier and the selected sound |
|
| source |
|
Recording is impossible | Incorrectly selected source | Select the right source using the |
|
| recording selector |
Remote controller doesn’t work | No battery/ | Place/replace battery (2 ‘AAA’ |
|
| batteries) |
| You’re standing too far or on an | Get closer to the unit or reduce angle |
| exceeding angle from the front panel |
|
If the suggested remedies should not | work or the problem is not shown in | the list above, please contact your |
local Audio Analogue retailer. |
|
|