Promise Technology TX4000 user manual New Windows Server 2003 Installation

FastTrak TX4000 User Manual

New Windows Server 2003 Installation

The following details the installation of the FastTrak TX4000 drivers while installing Windows Server 2003.

1.Start the installation:

•Floppy Install: Boot the computer with the Windows Server 2003 installation diskettes.

•CD-ROM Install: Boot from the CD-ROM. Press F6 after the message “Press F6 if you need to install third party SCSI or RAID driver” appears.

2.When the Windows Server 2003 Setup window is generated, press S to specify an Additional Device(s).

3.Insert the FastTrak TX4000 driver diskette into drive A: and press Enter.

4.Choose Win .NET 2003 Promise FastTrak TX4000/S150 TX Series (tm) Controller from the list that appears on screen, and then press the Enter.

5.Press S to use the driver on the floppy disk and then press Enter to continue with installation.

6.The Windows Server 2003 Setup screen will appear again saying “Setup will load support for the following mass storage devices:” The list will include “Win .NET 2003 Promise FastTrak TX4000/S150 TX Series (tm) Controller”.

NOTE: If there are any additional devices to be installed, specify them now. When all devices are specified, continue to the next step.

7.From the Windows Server 2003 Setup screen, press the Enter. Setup will now load all device files and then continue the Windows Server 2003 installation.

34