Promise Technology user manual Installing the FastTrak TX4000 Card

FastTrak TX4000 User Manual

Installing the FastTrak TX4000 Card

The FastTrak TX4000 Controller card fits into any available 32-bit PCI slot (must be PCI 2.1 or 2.2 compliant). It also fits the 32-bit portion of a 64-bit PCI slot, on the system’s motherboard (see figure below).

1.Remove the cover of your system.

2.Remove the inside slot cover of an available 32-bit PCI slot on the motherboard.

3.Install the FastTrak TX4000 Controller card into the open slot (see Figure 1 below). Secure the bracket to the system’s frame.

4.Attach your system case’s 2- or 4-pin LED cable to the LED connector on the FastTrak TX4000 Controller card (see Figures 2 and 3, below). Make sure that pin 1 on the connector is aligned with pin 1 of the cable.

5.Fasten the controller card bracket to the system case (see below).

Figure 1. Insert the FastTrak TX4000 card into an open PCI slot.

6