FastTrak TX4000 User Manual
FastBuild (tm) Utility 1.xx (c)
[ Rebuild Array Menu ]
Array No |
| RAID Mode | Total Drv | Status |
Array 2 |
| Mirror | 2 | Critical |
Stripe Block: Not Available |
| Gigabyte Boundary: ON | ||
|
| [ Select Drive for Rebuild ] |
| |
Channel: | Drive ID | Drive Model | Capacity (MB) | |
1 : | 1 | QUANTUMCR8.4A | 8063 | |
|
| [ Keys Available ] |
| |
[↑ ] Up [↓ ] Down | [ESC] Exit | [Enter] Select |
| |
11.Under Select Drive for Rebuild, highlight the replacement drive.
12.Press Enter and confirm that the data will be copied on to the selected drive. All data on the replacement drive will be written over with mirrored information from the array drive. A progress bar will appear as below.
Please Wait While Duplicating The Image
10% Complete
13.Once the rebuild process is complete, reboot the system.
32
