
3.3Performing System Administration Tasks
To change system
For example, you can
•Change the Admin Password:
Type the new password, then retype it for verification purposes. Note: The password must be at least 8 characters. If you change your password and then forget it, your only recourse is to reset it to the default by performing a hardware system reset (see page 36).
•View System Log.
Click this button to view a log of system activity.
•Perform a Diagnostic Test.
The X4’s user interface uses a few basic buttons, which are listed in the table below.
BUTTON | FUNCTION |
|
|
Save Changes | Clicking this button initiates new settings and |
| changes. |
|
|
Write Settings to | Clicking this button puts new settings and |
Flash and Reboot | changes into |
| (Changes do not become effective until unit is |
| restarted.) |
|
|
Help | Clicking the Help icon at the top of any page |
| displays |
|
|
Note: We strongly recommend that you change the administrator password to safeguard the security of your network.
Chapter 3: System Administration | 35 |