Zoom X4 manual Quick Start Instructions, You Will Also Need, To Connect via the Ethernet Option

You Will Also Need

•A Macintosh, Linux, or Windows 95/98/98SE/2000/NT/Me/XP computer equipped with a Network Interface Card (NIC) or a Windows 98/98SE/2000/Me/XP computer equipped with a USB port.

•A telephone wall jack to plug the X4 unit into. The associated phone line must be DSL enabled.

1.3 Quick Start Instructions

Your computer should be on. You can connect your X4 unit to your computer’s Ethernet or USB port. Depending on your preference, follow the appropriate instructions below.

Note: Optionally, you can use both the X4’s Ethernet jack and its USB jack. By connecting two computers individually to your X4 unit—one using the Ethernet jack and the other using the USB jack—it is possible to share Internet access.

To Connect via the Ethernet Option

1 Macintosh, Linux, Windows NT, and 95 Users:

You do not need to run the CD-ROM software.

Skip to Step 2 below.

Windows 98/98SE, Me, 2000, and XP Users:

Install the software before connecting the hardware.

aInsert the supplied CD-ROM into your computer. The CD starts automatically and the Main Menu opens: (Note: If the CD does not start automatically, from the desktop, go to Start Run and then type D:\setup.exe, where D is the letter of your CD-ROM drive.)

6 X4 ADSL Modem User’s Manual