Zoom X4 manual LAN Settings, DHCP Dynamic Host Configuration Protocol

Models: X4

1 56
Download 56 pages 29.83 Kb
Page 20
Image 20

User Name

Supplied by your service provider.

 

 

Password

Supplied by your service provider.

 

 

Service Name

Optional; supplied by your service provider.

 

 

Disconnect Time

ADSL connection will be dropped after the

 

ADSL line is idle for a certain amount of time

 

(measured in seconds). Select 0 to ensure

 

that you won’t be disconnected.

Authentication

PPP user authentication method. Default is

 

Auto; you can specify CHAP or PAP only.

Automatic Reconnect

Disabled by default. Check this box if you

 

want to be reconnected automatically if the

 

ADSL connection is terminated

 

unexpectedly.

DHCP (Dynamic Host Configuration Protocol)

Typically, you should not need to change your DHCP setting. The only case when you might want to change it is if your provider is using Bridged or Routed IP Encapsulation. Your service provider will instruct you.

DHCP client enable

Check this box only if instructed to by your

 

service provider.

 

 

Host Name

If necessary, supplied by your service

 

provider.

 

 

2.3 LAN Settings

By modifying your LAN ADSL setup and DHCP settings, you can control the number of computers that can connect to the X4. The default address range allows 12 computers to join the network. To change your settings, from the Advanced Setup page click the LAN Settings button.

20

X4 ADSL Modem User’s Manual

Page 20
Image 20
Zoom X4 manual LAN Settings, DHCP Dynamic Host Configuration Protocol