2 | The Basic Setup page displays. You are now communicating |
| with your X4. This page provides details about your Internet |
connection and includes information that the X4 uses to automatically connect to your service provider.
aCheck that the VPI, VCI, and Encapsulation settings match those supplied by your service provider. (Refer to the table on page 5 if necessary or consult your provider.)
bEnter the User Name and Password supplied by your service provider.
cOptional: Enter a Service Name if your service provider has given you one.
dClick Save Changes and then click Write Settings to Flash and Reboot. Once the reboot is complete and the unit has reset itself (when the front panel’s LINK light remains on steady again), your X4 is ready to use. You can open another Web browser or use the one that is already open to access the Internet.
12 | X4 ADSL Modem User’s Manual |
