Zoom X4 manual To Connect via the USB Option, b Click the ADSL Modem Installation Wizard button

To Connect via the USB Option

1	You must install the requisite USB software on your
	Windows computer before connecting the hardware.

a Insert the supplied CD-ROM into your computer. The CD starts automatically and the Main Menu opens: (Note: If the CD does not start automatically, from the desktop, go to Start Run and then type D:\setup.exe, where D is the letter of your CD-ROM drive.)

	b Click the ADSL Modem Installation Wizard button
		and, if prompted, the USB option. The software
		installation proceeds automatically. When the process is
		complete, the Main Menu minimizes for future use and a
		Zoom Web Console icon resides on your desktop.
2	Now connect the hardware. All connections originate from
	the X4’s back panel.

PWR ON OFF

USB

RESET ETHERNET PHONE ADSL

(For reference, we have included a table that defines these back panel ports, or jacks; see page 39.)

aPlug one end of the included power adapter into the unit’s PWR jack and the other end into a power strip or wall receptacle.

Chapter 1: Installation Instructions 9