FastTrak TX4000 User Manual
New Windows ME Installation
The following details the installation of the FastTrak TX4000 drivers while installing Windows ME.
1.Install the FastTrak TX4000 controller card into your system.
2.Install Windows ME fully.
3.After installation, go to the Start menu and choose Settings.
4.From the Settings menu, choose Control Panel.
5.In the Control Panel window,
6.In the System window, choose the Device Manager tab.
7.In the hierarchical display under Other Devices is a listing for PCI RAID Controller. Click it then click the Properties button.
8.In the Properties window, choose the Driver tab then choose Update Driver and click Next.
9.Choose Search for a better driver than the one your device is using now (recommended) then click Next.
10.Choose Specify Location then type
11.Insert the FastTrak TX4000 driver diskette into the A: drive.
12.Click the Next button. A message informing you that
13.Click Next, then click Finish.
14.When asked if you want to restart your computer, click Yes. Immediately remove the diskette from drive A:.
40
