Promise Technology TX4000 user manual Ide

FastTrak TX4000 User Manual

IDE 2	IDE 1
IDE 4	IDE 3

LED Pin 1

Figure 2. TX4000 card

Important

You must use an 80-wire, 40-pin cable when connecting your hard drives to the FastTrak TX4000 controller card. The FastTrak TX4000 package contains four 80-wire, 40-pin cables.

Notes

• The FastTrak TX4000 Controller card is a PCI Plug-n-Play (PnP) device. No changes are necessary in the Motherboard CMOS Setup for resources or drive types in most applications.

•If you wish to boot from a FastTrak TX4000 drive array AND continue to use hard drives attached to your motherboard’s IDE controller, refer to your motherboard manual for the specific BIOS settings to use in order to establish their proper boot order.

8