Installing the Front Panel
Front Panel |
Front panel fixing holes
Eye
1Open the electrical component box cover removing the screws.
2Connect the cables of the front panel to the PCB as shown in figure.
3Close the electrical component box cover and secure the screws.
Hook and Eye |
Air blocking kit
4Install the front panel using two hooks on the both sides of the indoor unit.
5Secure the front panel to the indoor unit using the bolts(4EA).
Note ◆ When user’s optional accessory is a wireless remote controller, you have to install the receiver & display unit; refer to page 60.
◆There are four kinds of air blocking kits. Fill up the air outlet(s) with one or more kits depending on the situation, then install the insulation to block air completely.