Receiver & Display Unit Installation (Optional)
Accessories |
|
|
|
Wireless Remote | Battery(2) | FH M4 X 16 Tapped | Remote Controller |
Controller(1) |
| Screw(2) | Holder(1) |
Receiver & Display Unit(1)
In case of using the wireless remote controller, you must install the receiver & display unit to the front panel before fixing the panel.
1Disassemble four screws on the place where you would like to install the receiver & display unit, inside the front panel.
2Remove the part of the front panel.
3Secure the receiver & display unit with the screws, then install the insulation.
Receiver |
& Display |
Unit |
4Connect the end of the connector wire to the receiver & display unit and connect the other end of the wire to the electrical component box as shown in figure.
CAUTION
◆Optional kits must be installed by an air conditioner specialist.
◆Before installing the optional kits, ensure that you have turned off the main power.