Centralized Controller Installation (Optional)
Accessories
Centralized Controller(1) | Cable Clamp(5) | TH M4 X 16 Tapped | |
|
|
| Screw(7) |
Transmitter(1) | Spacer Support(4) |
|
1 Open the centralized controller cover by using two grooves on the top of it.
Electrical component box
Transmitter
Sub PCB |
| Main PCB | ||
|
|
|
|
|
|
|
|
|
|
2Secure the rear cover of the centralized controller on the wall with two screws.
3Secure the transmitter with four spacer supports into the electrical component box.
|
4Connect the cable from the PCB to the transmitter.
And connect another cable from the O1, O2 terminals to the transmitter as shown in figure.
