Audio Authority 1361 user manual Overscan Output Freeze Power

OVERSCAN: Toggles between over-scanned and under-scanned normal image

OUTPUT: Toggles between composite, S-Video and component outputs

FREEZE: Causes the image currently diplsayed on the screen to freeze

POWER: Switches between “on” and “standby”

OVERSCAN OUTPUT FREEZE POWER

1 2 3 CONTRAST

The four keys in the corners shown below (ZOOM, ASPECT, POS/ PAN, and SIZE/EXP) control picture manipulations and the arrowed keys work in conjunction with these four keys to do the actual manipulations. The DEFAULT key (in the middle of the arrow key matrix) returns the following parameters to factory presets: Zoom, Position, Size and Picture adjustments. Descriptions of the ZOOM, ASPECT, POS/PAN, and SIZE/EXP functions are shown below.

ZOOM: Press the ZOOM key to enlarge a section of the picture. Press it again to return to normal image size. When the ZOOM key is pressed, the picture

is divided into nine zones. Pressing one of the numbered keys selects the portion of the image (the zone) you want to enlarge. The ARROW keys can also be used to move across the image.

POS/PAN: If the unit is in under-scan mode, pressing this button allows the user to position the under- scanned image anywhere on the raster using the arrow keys. If the unit is in the over-scan mode, pressing this key allows the user to pan the over- scanned image using the arrow keys.

ASPECT: This key toggles three modes. Full is the regular 4:3 aspect mode. The second toggle activates the Pan and Scan mode wherein you can adjust the image horizontally and vertically. The final toggle activates the letterbox mode.

SIZE/EXP: When in the under-scan mode, pressing this button allows the arrow keys to expand or shrink the image within the monitor’s raster. If the system is in over-scan mode, the arrow keys set the degree of overscan.

1	2	3	CO
4	5	6	B
7	8	9	C
ZOOM		ASPECT	S
	DEFAULT		V-
POS/PAN		SIZE/EXP	NT
SYS-RESET			COL

8