Expand and Extend the AVAtrix

Add Remote Zones

The 1176 HD Cat 5 Matrix Router expands an AVAtrix system to allow six additional matrix outputs. Add up to five 1176s to the AVX-562to increase the total outputs to 36 remote locations. Connects via internal system bus cable and four jack screws.

Interface with an Audio Distribution System

The 1172 Audio Interface is a breakout adapter that allows the easy connection of whole-house audio amplifier components. It provides digital and analog audio to independent audio systems with integrated switching or systems with dedicated zone amplifiers. Connects via internal system bus cable and four jack screws.

Bus Cable for Adding More than Two Expanders

The AVAtrix has an internal ribbon bus cable that allows for two expanders (802567). If you plan to add three to five expanders, the seven-port 802568 bus cable is required.

Send IR Signals to or from the Head End

The 1109 IR Injector allows IR control signals to be sent from a device near the AVAtrix out to IR emitters connected to wallplate/receiver jacks. Connections for up to six wallplate/receivers with each pathway operating independently to enable a mix of incoming and outgoing IR signals. Requires no power source.

Any Source,

Any Display,

Any Time.

2048 Mercer Road, Lexington, KY 40511-1071 USA Phone: 859-233-4599 • Fax: 859-233-4510 Customer Toll-Free USA & Canada: 800-322-8346 www.audioauthority.com

AVAtrix, Audio Authority and the Double-A Symbol are trademarks or registered trademarks of Audio Authority Corporation. Copyright August, 2008.

Page 4
Image 4
Audio Authority AVX-562 manual Expand and Extend the AVAtrix, Add Remote Zones