Audioaccess AVR21EN manual Features, Connector Complement/Preliminary Specifications, Audio, Video

Models: AVR21EN

1 2
Download 2 pages 10.07 Kb
Page 2
Image 2
Features

Features

Audio

70 Watts x 2 stereo mode

70 Watts x 7 multichannel mode

Two AM/FM tuners

Six rear-panel analog inputs; one front-panel analog input

Four rear-panel digital inputs: two optical,

two coax; front panel: one coax, one optical

EzSet/EQ; includes microphone

Surround modes include: Dolby® Digital EX, Dolby Pro Logic® II, Dolby Pro Logic IIx, Dolby Headphone, DTS,® DTS Neo:6,® Logic 7® and more

Additional 7.1-channel DVD audio input

7.1-Channel preamp outputs

Flash-upgradeable

Video

Seven rear-panel composite and S inputs; one front-panel composite and S input

Five rear-panel component video inputs; one front-panel component input

DCDi by Faroudja® upconverter scales all inputs to 1080i via HDMIoutput and 480P via component output

Composite video camera input

Controller

On-screen programming for all AVR and whole-house functions

Six dedicated IR outputs with built-in IR library and front-panel IR learning

Three RS-232 source interface ports

Six “Flag In” source status ports

One 12-volt trigger output

One RS-232 port for control of AVR functions and programming upgrades

One external IR receiver input and loop- through output

Multiroom

Two multiroom digital audio bus outputs stream eight digital audio sources and two-way control signals

Six composite multiroom video outputs

Connector Complement/Preliminary Specifications

Audio Section

Stereo mode: 70 Watts per channel, continuous average power (FTC), 20Hz – 20kHz, @ <0.1% THD, both channels driven into 8 ohms

Seven-channel surround modes:

70 Watts per channel, all channels driven, @ <0.1% THD, 20Hz – 20kHz into 8 ohms

Input sensitivity/impedance

linear (high-level): 200mV/47k ohms

Signal-to-noise ratio (IHF-A): 97dB

Surround system adjacent channel separation – Dolby® Pro Logic® I/II/IIx: 40dB

Dolby® Digital: 55dB

DTS®: 55dB

Transient intermodulation distortion (TIM): Unmeasurable

Specifications are preliminary and subject to change.

FM Tuner Section

Frequency range: 87.5 – 108MHz

Usable sensitivity: IHF 1.3µV/13.2dBf

Signal-to-noise ratio (mono/stereo): 70/68dB

Distortion (mono/stereo): 0.2/0.3%

Stereo separation: 40dB @ 1kHz

Selectivity: ±400kHz, 70dB

Image rejection: 80dB

IF rejection: 90dB

AM Tuner Section

Frequency range: 520kHz – 1720kHz

Signal-to-noise ratio: 45dB

Usable sensitivity: Loop 500µV

Distortion: 1kHz, 50% mod 0.8%

Selectivity: ±10kHz, 30dB

Video Section

Television format: NTSC

Input level/impedance: 1V p-p/75 ohms

Output level/impedance: 1V p-p/75 ohms

Video frequency response –

Composite and S-video: 10Hz – 8MHz (–3dB)

Component video: 10Hz – 50MHz (–3dB)

General

Power requirement: AC 120V/60Hz

Power consumption – Standby: 14W

Idle: 77W

Max (seven channels driven): 768W

Dimensions (H x W x D) –

Product: 6-5/8"x 17-5/16"x 17-1/8" (168mm x 439mm x 434mm) Shipping: 10-7/8"x 22-3/4"x 21-3/4" (276mm x 578mm x 552mm)

Weight –

Product: 25 lb (11.4kg)

Shipping: 32 lb (14.5kg)

Audioaccess

Audioaccess, Harman International and Logic 7 are registered trademarks, and W.H.E.N. is a trademark, of Harman International Industries, Incorporated.

DCDi by Faroudja is a registered trademark of Genesis Microchip Inc. Dolby and Pro Logic are registered trademarks of Dolby Laboratories. DTS and DTS Neo:6 are registered trademarks of DTS, Inc.

HDMI is a trademark of HDMI Licensing LLC.

250 Crossways Park Drive Woodbury, NY 11797 www.audioaccess.com 888.691.4171

Fax: 516.682.3510

©2006 Harman International Industries, Incorporated. All rights reserved. Part No. AAAVR21ENPI

Page 2
Image 2
Audioaccess AVR21EN manual Features, Connector Complement/Preliminary Specifications, Audio, Video, Controller, Multiroom