Connections
20
Connecting to a Dolby Digital Amp
DVD disc must be recorded in Dolby Digtal.
You must have Dolby Digital decoder or 6 channel Amp, 5 speakers and 1 bass woofer.
You must set Digital Out of AC3 at "Raw"in Audio Setting
This product is manufactured by technical co-operation with Dolby Laboratories
this symbol and trademark are reserved for Dolby Laboratories.
Dolby Laboratories Inc. All rights Reserved.
C
Ca
au
ut
ti
io
on
nWhen connecting an amplifier equipped with Dolby Digital, connect it in the same way as
shown above
When connecting it, refer to the Audio system's manual.
Be sure to adjust the receiver's volume to a moderate listening level. Otherwise, the speakers
may be damaged by a sudden high volume level.
Turn off the receiver before you connect or disconnect the DVD player's power cord.
If you leave the receiver power on, the speakers may be damaged.
VideoCable
CenterSpeaker
Sub
Speaker
Front
Speaker
(left)
RearSpeaker
(leftsurround)
Front
Speaker
(right)
RearSpeaker
(rightsurround)
Audio
Cable
75ohm Coaxial Cable
or
Todigital audio output
Receiverequipped with a
Dolbydigital decoder
RearPanel