Zweita Co N/C Series Charging the battery via a USB port, Optimising battery operating time

Operating Pocket PC

Connecting PSC11R-050 power adapter to cradle with adapter

3

4

21

►Connect the adapter (1) to the ActiveSync port of the cradle.

►Connect the power adapter cable (2) to the adapter.

►Connect the PSC11R-050 power adapter (3) to an electrical outlet.

►Place the Pocket PC in the cradle (4).

The installed battery will now be charged. The power-on indicator flashes orange. When the battery is fully charged, the power-on indicator lights continuously orange.

Charging the battery via a USB port

►Connect the ActiveSync cable to your Pocket PC.

►Connect the ActiveSync cable to the computer’s USB port.

The computer’s USB port must deliver no less than 500 Ma of power. Because of the low

i charging current, the charging process will take longer than it does using the power adapter.

Optimising battery operating time

When you have completely charged the battery, you can operate the Pocket PC for up to 12 hours without a power connection. However, it is not possible to exactly specify the maximum operating time, as different applications use more or less energy.

In the system settings you can make settings that help you save energy when using your Pocket PC. These settings enable you to use the battery operating time optimally.

In the default setting, a setting is activated that automatically switches the Pocket PC into

i the Suspend mode after three minutes when working without a power connection if no entries are made during this time. You can switch on the Pocket PC again at any time by briefly pressing the Suspend/Resume button and then continue working where you left off.

A26391-K165-Z120-1-19, Edition 3 33