NOTE: Only one pair of channels can be bridged together. Do not attempt to bridge both A & B
speaker terminals, as this may result in a lower impedance than the amplifier is designed to accommodate, and may damage your amplifier. The minimum impedance for the total load connected to a pair of channels in the bridged mode is
NOTE: This amplifier is capable of use with standard US voltage (115VAC) as well as European voltage
(230VAC). The amplifier will be preset for the voltage of the country it is sold in. Use with other voltages requires some changes to be made to the amplifier. Should you wish to use the amplifier in a country other than the one for which it was purchased, please contact Phoenix Gold Home Products support at
AMP 200 Specifications
Power Bandwidth 20Hz-20kHz:
80W per CH into 8 ohm loads with less than 0.2% THD+N 125W per CH into 4 ohm loads with less than 0.2% THD+N 250W Bridged Mono into 8 ohms with less than 0.2% THD+N
Crosstalk: >65dB @ 1kHz, ref. to rated power into 8 ohms
Frequency Response: (20Hz to 20kHz)+0.0dB,
Signal to Noise ratio:
AC Power Consumption: 700W (all channels driven)
Net Weight: 24.3 lbs (11.0 kgs)
Gross Weight: 32.2 lbs (14.6.0 kgs)
AC Mains Fuse:
115V ~ 60Hz T6.3AL, 250V
230V ~ 50Hz T3.15AL, 250V
Limited Warranty
Phoenix Gold International, Inc. (or "AudioSource") warrants its amplifier products against defects in materials and workman- ship for a limited period of time. For a period of two years from date of original purchase, we will repair or replace the product, at our option, without charge for parts and labor. Customer must pay all parts and labor charges after the limited warranty period expires. The limited warranty period for factory refurbished products expires after ninety (90) days from date of original purchase.
This limited warranty applies only to purchases from autho- rized AudioSource Electronics retailers. This limited warranty is extended only to the original purchaser and is valid only to consumers in the United States.
Consumers are required to provide a copy of the original sales invoice from an authorized AudioSource dealer when making a claim against this limited warranty. This limited warranty only covers failures due to defects in materials or workmanship that occur during normal use. It does not cover failures resulting from accident, misuse, abuse, neglect, mishandling, misapplica- tion, alteration, faulty installation, modification, service by anyone other than Phoenix Gold, or damage that is attribut- able to Acts of God. It does not cover costs of transportation to Phoenix Gold or damage in transit. The customer should return their defective product, freight prepaid and insured, to Phoenix Gold International, Inc. only after receiving a Return Authorization.
This warranty will become void if the serial number identifica- tion has been wholly or partially removed, altered or erased. Repair or replacement under the terms of this warranty does not extend the terms of this warranty. Should a product prove to be defective in workmanship or material, the consumer's sole remedies will be repair or replacement as provided under the terms of this warranty. Under no circumstances shall Phoenix Gold be liable for loss or damage, direct, consequen- tial or incidental, arising out of the use of or inability to use the product. There are no express warranties other than described above.
Applications
Powering Speakers Outdoors
Whenever you are using loudspeakers outdoors, you should be aware that sound does not travel like it
would in your home. Without the reflective surfaces of walls and ceilings, sound outdoors will dissipate quickly. Therefore, in an outdoor situation the AMP200 provides the opportunity to bridge adjacent channels, effectively doubling the available power for your speakers. This can help to overcome the problem of using speakers outdoors assuming the speakers chosen are capable of handling the additional power.
It should be noted that the AMP200 is rated to operate into a minimum
Therefore, if you are using more than a single
5
