Safety Instructions

WARNING

To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. To reduce the risk of electric shock, do not remove cover (or back); no user-serviceable parts inside. Refer servicing to qualified service personnel. To prevent electric shock, match the wide blade of the AC plug to the wide slot of the AC outlet, and insert fully.

ATTENTION

Pour eviter les chocs electriques, introduire la lame la plus large de la fichedans la borne correspondeante de la prise et pousser jusqu’au fond.

CAUTION

RISK OF ELECTRIC SHOCK

!

DO NOT OPEN

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of non-insulated dangerous voltage within the products’ enclosure that may be of sufficient magnitude to constitute a risk of electrical shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Read Instructions

All the safety and operating instructions should be read before the appliance is operated.

Retain Instructions

The safety and operating instructions should be adhered to.

Heed Warnings

All warnings on the appliance and in the operating instructions should be adhered to.

Follow Instructions

All operating and use instructions should be adhered to.

Water and Moisture

The appliance should not be used near water. For example, near a bathtub, wash-bowl, kitchen sink, laundry tub, in a wet basement or near a swimming pool, etc.

Ventilation

The appliance should be situated so that its location or position does not interfere with its proper ventilation For example, the appliance should not be situated on a bed, sofa, rug or similar surface that may block the ventilation openings; or be placed in a built in situation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.

Heat

The appliance should be situated away from heat sources such as radiators, heat registers, or other appliances (including amplifiers) that produce heat.

Power Sources

The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance.

Grounding or Polarization

Precautions should be taken so that the grounding or polarization means of an appliance is not defeated.

Power Cord Protection

Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed on or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

Cleaning

The speaker should be cleaned only as recommended be the manufacturer.

Non-Use Periods

The power cords of the appliance should be unplugged from the outlet when left unused for a long period of time.

Object and Liquid Entry

Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings.

Damage Requiring Service

The appliance should be service by qualified personnel when; a) the power cord or the plug has been damaged; b) objects have fallen, or liquid has been spilled into the appliance; c) the appliance has been exposed to rain; d) the appliance does not appear to operate normally or exhibits a marked change in performance; e) the appliance has been dropped, or the enclosure damaged.

Servicing

The user should not attempt to service the appliance beyond that described in the operating instructions. All other servicing should be referred to qualified service personnel.

Product Servicing

In the event your System 230 fails to operate properly, please contact the dealer where you purchased the unit, or you may contact AudioSource directly for further assistance.

Specifications:

Powered Subwoofer:

100W, 30Hz ~ 250Hz

Inputs:

Line Level or Speaker Level with Speaker Level Pass Through

LED Power Indicator

 

Subwoofer Level Control

 

Low Pass Frequency Adjustment

 

Frequency Response:

Satellites: 180Hz to 20kHz ± 5dB

 

Center Channel: 180Hz to 20kHz ± 5dB

 

Subwoofer: 30Hz to 250Hz ± 10dB

Recommended Amplifier Power: 50 to 100 Watts per Channel

Speaker Wire Provided:

Center Channel (one piece) = 3m

 

Satellites (four pieces) = 7m each

9300 North Decatur • Portland, Oregon 97203 • tel: 503-286-9300 fax: 503-978-3302 audiosource@phoenixgold.com • www.audiosource.net

Printed in China © 2003 Phoenix Gold International, Inc.

Page 4
Image 4
AudioSource LS130C user manual Safety Instructions, Risk of Electric Shock Do not Open

LS130C, LS130 specifications

The AudioSource LS130 and LS130C speakers are engineered to deliver exceptional sound quality and versatility, making them a popular choice for home audio setups. These speakers offer a seamless blend of performance, design, and affordability, allowing audiophiles and casual listeners alike to enjoy optimal audio playback.

One of the standout features of the LS130 is its high-efficiency design, which enables it to produce powerful sound output while minimizing distortion. The speaker utilizes a robust 6.5-inch woofer and a 1-inch silk dome tweeter, providing a rich, full-range sound that is capable of handling a diverse range of musical genres. The LS130C, designed specifically for center channel use, shares similar components and technology, ensuring that dialogue in movies and television is crystal clear and well-defined.

Both models utilize advanced crossover technology, which effectively divides the audio signal between the woofer and tweeter to ensure an even sound distribution across all frequencies. This results in a balanced audio performance, allowing the listener to experience the full spectrum of sound with clarity and precision.

The build quality of the LS130 and LS130C is noteworthy. They feature sturdy MDF cabinets that reduce unwanted vibrations, ensuring that sound reproduction remains accurate. The sleek design makes these speakers an attractive addition to any home theater or audio setup, blending seamlessly with contemporary decor.

Connectivity options are plentiful, with the LS130 designed to work well with both home theater systems and stereo setups. The speakers have a nominal impedance of 8 ohms and an efficient power handling capability, making them compatible with a wide range of amplifiers and receivers.

Another significant characteristic of these speakers is their versatility. The LS130 can be used as part of a larger audio system, while the LS130C is perfect for enhancing a surround sound experience. Together, they deliver an enveloping soundstage, enhancing the overall listening experience, be it for music or cinematic use.

In summary, the AudioSource LS130 and LS130C speakers combine innovative technology, quality materials, and thoughtful design, making them an excellent choice for anyone seeking to enhance their audio experience. Whether used in a dedicated home theater or a casual listening space, these speakers are capable of delivering stunning performance that doesn't compromise on quality.