| 8. Remove and retain mounting bracket and screws | |
| (items 5&3 pg2) from console (item 6 pg2). Use | |
| rubbing alcohol to clean sheet metal in the cut– | |
| out area in headliner. Wipe surface dry with a | |
| clean cloth. Remove protective tape from | |
| adhesive strips on mounting bracket (item 5 pg2). | |
| Make sure bracket is centered prior to | |
| pressing tape against roof surface. Once the | |
| tape is applied to the roof, DO NOT REMOVE | |
| AND REPOSITION or the tape will not stick | |
| properly. Install using (2) two O.E. screws in | |
| original holes and (2) two # 10 x 1/2" TEK screws | |
FIGURE 7 | ||
(item 2 pg2). See Figure 7. |
9.Install A/C switch into rear of console (item 6 pg2) and O.E. bracket over A/C switch. Make sure control snaps securely into bracket. See Figure 8.
10.Secure bracket to console brace using (2) two # 8 x 9/16" screws (item 1 pg 2). See Figure 8.
FIGURE 8
5
