Audiovox ACD-25 manual Bass Control, LEFT/RIGHT Balance Control, FRONT/REAR Fader Control

5BASS CONTROL

To adjust the bass level, first select the Bass mode by pressing the Select button 3 so that the “BAS” indication appears on the display panel. Within 5 seconds of choosing the Bass mode, press the or button of the Level Control 2 to adjust the bass response as desired. The bass level will be shown on the display panel from a minimum of -7 to a maximum of +7 (0 is flat response). The display will automatically return to the normal indication 5 seconds after the last adjustment or when another

function is activated.

6LEFT/RIGHT BALANCE CONTROL

To adjust the left-right speaker balance, first select the Balance mode by pressing the Select button 3 so that the “BAL” indication appears on the display panel. Within 5 seconds of choosing the Balance mode, press the or button of the Level Control 2 to adjust the balance as desired. The balance position will be shown on the display panel from “BAL.L 15” (full left) through “BAL.R 15” (full right). When the volume level between the left and right speakers is equal, “BAL 0” will be shown on the display panel. The display will automatically return to the normal indication 5 seconds after the last ad- justment or when another function is activated.

7 FRONT/REAR FADER CONTROL

To adjust the front-rear speaker balance, first se- lect the Fader mode by pressing the Select button

3so that the “FAD” indication appears on the dis- play panel. Within 5 seconds of choosing the Fader

mode, press the or button of the Level Control

2to adjust the front-rear speaker balance as de- sired. The fader position will be shown on the dis- play panel from “FAD.R 15” (full rear) through “FAD.F 15” (full front). When the level between the front and rear speakers is equal, “FAD 0” will be shown on the display panel. The display will automatically return to the normal indication 5 seconds after the last adjustment or when another function is acti- vated.

8LOUDNESS CONTOUR (LOUD)

When listening to music at low volume levels, this feature will boost the bass and treble ranges to com- pensate for the characteristics of human hearing. Press the button to activate this feature and the in- dication “LD” will appear on the display panel. Press- ing the button again will deactivate the feature (the “LD” indication will disappear from the display panel).

9AUDIO SETTING MEMORIES (P1/P2/P3)

Three pre-set buttons are provided on this unit to store desired audio level positions into memories which can be easily recalled. To set any of the 3 audio

memories, use the following procedure:

1. Use the Select button 3 and Level control 2 to adjust the setting of the volume, treble, bass, bal-

ance and fader to the desired positions.

2. Press the Select button 3 to call any of the audio functions on the display. Within 2 seconds of pressing the Select button and while the audio function is still on the display panel, press the pre- set button (1 through 3) to be set and continue to hold it in. After approximately 2 seconds, the vol- ume will be momentarily muted and the pre-set number will appear on the display panel indicat- ing that the audio levels are now set into that

memory position. The settings can be recalled at any time by pressing the Select button 3 and then that pre-set button within 2 seconds.

bl AUDIO MUTE (MUTE)

This button is used to mute the volume from the sys- tem. By pressing the button, the indication "MUTE" will appear on the display panel and the volume will be muted. Pressing the Mute button again or acti- vating the Volume Control 2 or Select button 3 will return the volume level to the setting in use before the Mute function was activated.

bmAM/FMBANDSELECTOR(BND)

During radio operation, each momentary press of this button will change the radio band. The indication “AM1”, “AM2”, “FM1”, “FM2”, or “FM3” will appear on the display panel according to your selection.

During disc play, pressing this button will stop play of the disc and switch to radio operation without eject-

ing the disc. During this time, theindication will remain on the display panel to show that a disc is still loaded in the unit. Press the CD Mode Selector bu to return to disc play from the beginning of the last track in play.

bn MANUAL UP/DOWN TUNING ( /)

AUTOMATIC SEEK TUNING

Each time the button is tapped, the radio will tune one frequency step higher. Similarly, each tap of the button will tune one frequency step lower. To manually tune in a station, tap the button of the ap- propriate direction until the desired frequency is

reached.

Pressing either button for longer than 0.5 seconds and then releasing will activate the Automatic Seek

OPERATINGINSTRUCTIONS

6