INSTALLATION INSTRUCTIONS

2

INSTALLATION INSTRUCTIONS

This unit is designed for installation in cars, trucks, and vans with an existing radio opening. In many cases, a special installation kit will be required to mount the radio to the dashboard. These kits are available at electronics supply stores and car stereo specialist shops. Always check the kit application before purchasing to make sure the kit works with your vehicle. If you need a kit but cannot find it available, call our toll-free “HELP” line at

1-800-645-4994.

UNIVERSAL INSTALLATION PROCEDURE USING MOUNTING SLEEVE

1.Remove the detachable front panel if it is attached to the chassis by pushing the “Release” button. Slide the mount- ing sleeve off of the chassis. If it is locked into position, use the removal tools (supplied) to disengage it.

2.Check the dashboard opening size by sliding the mounting sleeve into it. If the opening is not large enough,carefully cut or file as necessary until the sleeve easily slides into the opening. Do not force the sleeve into the open- ing or cause it to bend or bow. Check that there will be sufficient space behind the dashboard for the radio chassis.

3.Locate the series of bend tabs along the top, bottom, and sides of the mounting sleeve. With the sleeve fully inserted into the dashboard opening, bend as many of the tabs outward as necessary so that the sleeve is firmly secured to the dashboard.

4.Place the radio in front of the dashboard opening so that the wiring can be brought through the mounting sleeve. Follow the wiring diagram carefully and make certain all connections of the wiring harness are secure and insulated with wire nuts or electrical tape to insure proper operation of the unit. After completing the wiring connections, attach the front panel and turn the unit on to confirm operation (ignition switch must be “on”). If unit does not operate, recheck all wiring until problem is corrected. Once proper operation is achieved, turn off the ignition switch and proceed with final mounting of the chassis.

5.Carefully slide the radio into the mounting sleeve making sure it is right-side-up until it is fully seated and the spring clips lock it into place.

6.Attach one end of the perforated support strap (supplied) to the screw stud on the rear of the chassis using the hex nut provided. Fasten the other end of the perforated strap to a secure part of the dashboard either above or below the radio using the screw and hex nut provided. Bend the strap to position it as necessary. CAUTION: The rear of the radio must be supported with the strap to prevent damage to the dashboard from

the weight of the radio or improper operation due to vibration.

7.Re-attach the front panel to the chassis and test radio operation by referring to the Operating Instructions for the unit.

INSTALLATION USING KITS

1.If your vehicle requires the use of an installation kit to mount this radio, follow the instructions included with the installation kit to attach the radio to the mounting plate supplied with the kit.

2.Wire and test the radio as described in Step 4 above.

3.Install the radio/mounting plate assembly to the sub-dashboard according to the instructions of the installation kit.

4.Attach the support strap to the radio and dashboard as described in Step 6 above.

5.Replace the dashboard trim panel.

ISO INSTALLATION PROCEDURE

This unit has threaded holes in the chassis side panels which may be used with the original factory mounting brackets of some Toyota, Nissan, Mitsubishi, Isuzu, Hyundai and Honda vehicles to mount the radio to the dashboard. Please consult with your local car stereo specialist shop for assistance on this type of installation.

1.Remove the existing factory radio from its dashboard or center console mounting. Save all hardware and brackets as they will be used to mount the new radio.

2.Carefully unsnap the plastic frame from the front of the new radio chassis. Remove and discard the frame.

3.Remove the factory mounting brackets and hardware from the existing radio and attach them to the new radio.

CAUTION:DONOTEXCEEDM5X8MMMAXIMUMSCREWSIZE. LONGERSCREWSMAYTOUCHANDDAMAGE COMPONENTSINSIDETHECHASSIS.

4.Wire the new radio to the vehicle as per step 4 of the Universal Installation Procedure.

5.Mount the new radio assembly to the dashboard or center console using the reverse procedure of step 1.

Page 1 Page 3
Page 2
Image 2
Audiovox ACD28 Installation Instructions, Universal Installation Procedure Using Mounting Sleeve, Installation Using Kits
Page 1 Page 3

ACD28 specifications

The Audiovox ACD28 is a well-regarded portable CD player that has made a significant impact in the realm of personal audio equipment. Renowned for its compact design and user-friendly features, the ACD28 caters to audiophiles and casual listeners alike.

One of the main features of the ACD28 is its lightweight and portable structure, making it easy to carry around for on-the-go listening. Weighing just under a pound, this device can easily fit into a backpack or handbag, providing music enthusiasts with a convenient way to enjoy their favorite CDs wherever they are.

In terms of sound quality, the ACD28 boasts advanced audio technologies that enhance the listening experience. It supports multiple audio output formats, including CD-R and CD-RW, ensuring compatibility with a broad range of discs. The player is equipped with a high-fidelity sound system that delivers crisp and clear audio across various genres, from classical to rock. The dynamic range is well-balanced, allowing for a rich listening experience.

The ACD28 also features a built-in anti-shock mechanism that minimizes playback disruptions caused by external movements. This is particularly beneficial for users who may be listening while walking or traveling, as it ensures a seamless and uninterrupted audio experience. Additionally, the device allows users to program their favorite tracks, enhancing convenience for those who prefer custom playlists.

Another notable characteristic of the Audiovox ACD28 is its long battery life. The player can run for several hours on a single charge, making it ideal for extended listening sessions. The device is compatible with both standard AA batteries and rechargeable options, providing flexibility based on user preferences.

Moreover, the user interface of the ACD28 is designed for ease of use, featuring intuitive buttons and a clear display that indicates track information. This ensures that users can easily navigate their music collection without any hassle.

Overall, the Audiovox ACD28 is an excellent portable CD player that combines portability, sound quality, and user-friendly features. Whether you are commuting, exercising, or simply relaxing at home, the ACD28 delivers an exceptional audio experience that meets the demands of modern listeners. Its thoughtful design and reliable performance make it a valuable addition to any music lover's collection.
Top Page Image Contents