Custom Code Programming Example:

To Change the code from the factory pre-assigned code of 11 to “52” you would do the following:

1.Disarm the system by use of the transmitter, or by use of the emergency override sequence.

2.Turn the ignition switch to the on position.

3.Within 10 seconds, press and release the valet/override switch, 3 times.

4.Within 10 seconds turn the ignition switch off, on, off, on, off, on. (The siren or horn will beep and the lights will flash one time.)

5.Within 10 seconds, begin to press and release the push button switch to set the tenths digit.

(As per the example, press and release 5 times to set the tenths digit to 5)

6.Within 10 seconds of the last press of the push-button, turn the ignition switch off then on.

7.Within 10 seconds, begin to press and release the push button switch to set the units digit.

(As per the example, press and release 2 times to set the units digit to 2).

8.Turn the ignition switch to the off position. Immediately observe the LED flash pattern.

You will note the LED flashing five times, pause, and then flash two times, pause. This pattern will be repeated three times indicating the new code (52) has been accepted and stored in memory.

NOTE: If after step 8, the LED flashes a code other than what was just entered, this indicates that the code has not been changed. You will have to repeat steps 1 through 7 above being certain to note the following:

Acceptable digits 10ths or units are 1 through 9. The unit will not recognize a 0 (Zero), or no digit entered in any place, units or tenths.

NOTE: If 15 seconds of inactivity expire, or if the ignition switch is turned off for more then 5 seconds during any of the above steps, the unit will revert back to the last successfully stored code.

MANUALLY OVERRIDING YOUR SYSTEM:

USING THE CUSTOM CODE OVERRIDE

Assuming the override code programmed has not been changed, and the default override code of 11 is in the system's memory.

1)Enter the vehicle and turn the ignition switch to the on position. Note: The siren will sound.

2)Within 5 seconds, press and release the pushbutton switch 1 time.

3)Within 5 seconds, turn the ignition switch off then on.

4)Within 5 seconds, press and release the pushbutton switch 1 time.

5)Turn the ignition switch off then on and start the vehicle.

Note: If you have changed the programmed override code then substitute your new code tenths for step 2 above, and units for step 5 above.

ELIMINATING THE NORMAL ARM / DISARM CHIRPS

As explained earlier in the manual, you can eliminate the chirps selectively any time you arm or disarm the system simply by holding the ARM / DISARM button for

Page 8

128-6802

8 OF 12

Page 7 Page 9
Page 8
Image 8
Audiovox APS-511C owner manual Custom Code Programming Example, Eliminating the Normal ARM / Disarm Chirps
Page 7 Page 9

APS-511C specifications

The Audiovox APS-511C is a top-tier vehicle security system designed to provide comprehensive protection against theft and unauthorized access. Known for its reliability and advanced features, this system is a popular choice among car enthusiasts and everyday users alike.

One of the standout features of the APS-511C is its two-way communication capability. This allows the driver to receive real-time alerts and status updates directly on their remote control. Whether it’s a triggered alarm or a disturbance detected by the system, users can be instantly informed, enhancing their peace of mind.

The unit is equipped with a state-of-the-art shock sensor. This technology can detect vibrations and impacts to the vehicle, triggering an alarm if any suspicious activity is sensed. Additionally, the system features a backup battery, ensuring that the security measures remain active even if the vehicle’s power supply is compromised.

Another key characteristic of the Audiovox APS-511C is its comprehensive alarm system. The device generates an audible alarm and activates LED indicators to deter potential thieves. This multi-layer approach to security is crucial, especially in high-theft areas.

The APS-511C also incorporates a remote start function, allowing users to start their vehicle from a distance. This feature is particularly beneficial for those living in colder climates, enabling the engine to be warmed up before entering the car. Moreover, it adds convenience for users who prefer to cool down their cars in the summer heat.

Integration with a variety of vehicles is simple and straightforward, making it a versatile option for users with different makes and models. The installation process is user-friendly, though professional installation is recommended to ensure optimal operation and coverage.

Additional features include a panic button for emergencies, various programmable options, and the capability to customize sensitivity levels based on personal preferences.

In summary, the Audiovox APS-511C stands out in the competitive vehicle security market due to its user-friendly design, advanced technologies, and multitude of features. Its two-way communication, shock sensors, and remote start function are particularly appealing, making it a reliable option for those seeking to enhance their vehicle’s security. Whether for daily commuting or long-distance travel, the APS-511C provides an effective and robust solution to vehicle protection.
Top Page Image Contents