TRANSCEIVER ICONS AND THEIR INDICATIONS
When the Key Icon Button Has Been Operated for 3 seconds the trunk open icon will flash on the LED Screen.
When the Key Icon Button is pressed 2 times in suc- cession The three puffs of smoke show on the LCD screen. While the vehicle is running, the exhaust indi- cation will flash and the hour glass will indicate count down timer based on the 5, 10, 15, or 20 minute run time set up by your installation center. When the unit shuts off the exhaust indication will turn off and the trans- mitter will play a melody.
When Panic Mode has been activated and the system is armed the vehicle's lights, the lock and the siren icon will flash on the LCD screen. If the system is disarmed and the Panic Mode is activated, the lights, siren, and the unlock icons will flash on the LCD screen.
When ever the vehicle is operated from the two way transmitter, the unit will beep responsive to the function executed at the vehicle. 1 beep when armed, 2 beeps when disarmed, etc... at times It may be incon- venient or too noisy to hear the beep tones, so the sys- tem allows you to set the unit for vibrate mode. To toggle on or off beep tones/vibrate, press the F & Unlock buttons, the unit will beep or vibrate, and the icons shown left will appear on the screen.
If the alarm system has been triggered, the icon dis- played on the transmitter LCD will indicate which zone has been activated, as well sound the beep tones, or vibrate dependent upon the setting as shown above. The following trigger patterns will be displayed.
Triggered and the entry attempt was made to one of the vehicle doors.
Triggered and entry attempt was made to the vehicles hood or trunk.
Page 15
128-6772
15 of 20