Audiovox AV1410 CD PLAYER/CHANGER Operation, MP3/WMA Operation, CD Changer Operation

AV1410

CD PLAYER/CHANGER OPERATION

Instructions for Insert/Eject, Play/Pause, Stopping Playback, Track Selection, Fast Forward/Fast Reverse, Scan, and

Random Play are the same for DVD, CD, CD Changer and MP3 operation. Please see the DVD Player Operation section for information about these topics.

NOTE: Upon inserting a disc with the TFT screen open, the disc and track title (if available), along with the track number and playing time appear on the screen.

NOTE: CD-R and CD-RW will not play unless the recording session is closed.

MP3/WMA Operation

This player allows you to playback MP3 files recorded on CD- ROM, CD-R, and CD-RW. For CD-RW discs, please make sure it is formatted using the full method and not the quick method to prevent illegal disc operation.

MP3 Format Compatibility

The file naming formats listed below are compatible with this unit:

•ISO 9660 – file name: 12 characters, file extension: 3 characters

•ISO 9660 – file name: 31 characters, file extension: 3 characters

•Joliet – 64 characters

If the file or folder name does not conform to ISO 9660 file system standards, it may not be displayed or played back correctly.

Use the following settings when compressing audio data for your MP3 disc:

•Transfer Bit Rate: 320kbps

•Sampling Frequency: 48kHz

When recording MP3 up to the maximum disc capacity, disable additional writing. For recording on an empty disc up to maximum disc capacity, use the "Disc at once" setting.

Playing MP3/WMA Files

After inserting a MP3/WMA disc, files will play in the sequence of the “Root’ directory.

Use the numeric keypad (29) on the remote control to access files directly.

Selecting a Playback Mode

1.Press the STOP button (13) on the front panel or the / BAND button (20) on the remote control to stop disc play.

2.Press the button (19) on the remote control or the button on the joystick (17) to enter playback mode (PLAY MOD).

3.Press the , , or buttons (18, 17, 19) on the

remote control, or the or button (16, 17) on the joystick to choose from the following playback options:

Table 17: MP3/WMA Playback Modes

Play Mode	Playback Details
Disc Normal	Playback all files on the disc
	and stop at the end.
Disc Repeat	Repeat playback of all files on
	the disc.
Shuffle	Randomly play all files and stop
	at the end.
Single Track	Play a specific file and stop.
Repeat Track	Repeat playback of a specific
	file.
Folder Normal	Play all files in a folder and stop
	at the end.
Folder Repeat	Repeat playback of all files in a
	folder/directory.

4.Press the button (14) on the remote control to confirm the playback mode then press the button (18) to begin playback.

CD Changer Operation

This unit is capable of operating a SANYO CD changer. Please use the remote control supplied with your changer when the changer is in use.

NOTE: The Scan, Random, and Repeat features are not available in CD Changer mode.

Accessing CD Changer Mode

Once the CD changer is properly connected, press the SRC button (15) on the front panel or remote control (8) to switch to CD Changer mode.

Random Playback

With a CD playing, press the 5/RDM button (12) on the front panel or the RDM button (33) on the remote control to

activate random playback and play all tracks in random order. “Shuffle On” appears on the screen.

Press the 5/RDM button again to randomly play all the discs. The "RDM" and "ALL" indicators appear lit on the display.

Press the button (19) on the remote control or the button on the joystick (17) to play the next random track.

Press the RDM button again to turn random play off. “Shuffle Off” appears on the screen.

Moving Through Discs

Press the DISC button (12) on the remote control or the 1/ DISC- button (8) on the front panel to move to the previous disc.

Press the DISC button (11) on the remote control or the 2/ DISC+ button (9) on the front panel to move to the next disc.

20