Audiovox AVD400A owner manual Front, Connections

F. Connections

AVD400A DVDPLAYER

DOLBY

Front

Yellow Video Input (to DVD Player)

Red Audio In

White Audio In

Rear

Figure 3

1.Powering your DVD Player ( Refer to Figure 3)

Connect the black wire (-) to the vehicle ground. Connect the red wire (+) to a switched (Accessory) 12VDC source. Plug the other end into the 12VDC input jack on the back of the unit.

2.Remote IR Receiver ( Refer to Figure 3)

Plug the 1/8” plug on the remote IR cable into the IR IN jack on the back of the DVD player. Place the IR receiver anywhere in the vehicle to allow remote control from any location.

3.Connecting to a Monitor ( Refer to Figure 3)

a. Match the color-coded plugs to the appropriate jacks on the back of the DVD Player A/V OUTPUT jacks: Yellow (video) to Yellow, White (left audio) to White, and Red (right audio) to Red.

4.Connecting an External Video Source ( Refer to Figure 3)

To connect a video game or another audio/video source, plug the A/V cable into the A/V input jack on the front of the DVD player.

8