English - 48
MENU FUNCTIONS

Info messages

Messages shown in the display not caused by an actual
fault are instead saved under the Info messages heading.
Examples for such messages are Weak GPS signal and
Slope too steep. See 9.1 Fault messages on page 75 for
more information on possible reasons for each message.
By date
This list contains the latest 50 fault messages sorted by
date with the last incident to occur rst on the list.
By frequency
This list contains the latest 50 message sorted by how
many times the same fault has occurred.

Reset messages

To empty all message lists, select Reset and press OK.
Conrm by pressing OK once more.

6.7 Weather timer

This function allows the robotic lawnmower to
automatically adjust its mowing times based on how quick
the lawn grows. When the weather is good for grass
growth, the robotic lawnmower mows more often and
when grass growth is slower the robotic lawnmower will
automatically spend less time on the lawn.
The robotic lawnmower will however not operate longer
than the time that may be congured in the timer settings.
For optimal weather timer performance, it is recommended
when setting the timer to only de-select the times when the
robotic lawnmower must not operate. Other times should
be made available for the weather timer.
When the weather timer is activated, the robotic
lawnmower needs time to decide what the optimal
mowing time is for the working area in question. For this
reason it can take a number of days before the mowing
results are optimal.
When the weather timer is activated, it is very important
to regularly check that the blade disc is clean and that the
blades are in good condition. Any grass twisted around
the blade disc shaft or blunt blades can affect how the
weather timer functions.

Weather timer

To activate the weather timer: place the cursor at On and
press OK.
Weather timer
Cutting timeOn/Off
LowLow - Medium High High +
3012-1259