MENU FUNCTIONS
Calibration of guide wire
The guide wire may need to be calibrated in rare cases. This should only be done if the robotic lawnmower itself requests it or if your dealer recommends it.
1.Park the robotic lawnmower in the charging station.
2.Select Guide calibration and press OK.
3.The robotic lawnmower reverses out of the charging station and runs a calibration process over the guide wire after which it begins to mow.
Reset all user settings
This function allows you to reset the robotic lawnmower to the default settings it had when it left the factory.
The following settings are reset: • Timer
• Lawn coverage • Security level • ECO mode
• Messages
• Weather timer
The following settings are not altered: • PIN code
• Loop signal • Language • Date & Time
1.Select Reset all user settings in the menu and press OK.
2.Confirm by pressing OK.
English - 63
