MAINTENANCE

If long blades of grass or other objects find their way in, these may impede the blade disc. Even a slight braking effect leads to a higher consumption of energy and longer mowing times, and at worst will prevent the robotic lawnmower from being able to mow a large lawn. The blade disc must be removed to carry out a more thorough cleaning. If necessary, contact your dealer.

Chassis

Clean the underside of the chassis. Brush or wipe with adamp cloth.

Wheels

Clean around the front wheel and rear wheels as well as the front wheel bracket.

Body

Use a damp, soft sponge or cloth to clean the body. If the body is very dirty it may be necessary to use a soap solution or washing-up liquid.

Charging station

Clean the charging station regularly from grass, leaves, twigs and other objects that may impede docking.

8.5 Transport and moving

Secure the machine during transport. It is important that the robotic lawnmower does not move when it is being transported, for instance, between lawns.

8.6 In the event of a thunderstorm

To reduce the risk of damage to electrical components in the robotic lawnmower and its charging station, we recommend that all connections to the charging station are disconnected (power supply, boundary wire and guide wires) if there is a risk of a thunderstorm.

1.Make a careful note of which wire is connected where. The charging station’s connections are marked AR, AL, G1, G2.

2.Disconnect all wires.

3.Close the cover to the charging station to protect the connections from rain.

4.Connect all the wires if there is no longer arisk of thunder. It is important that each wire is connected to the right place.

3012-1068

3012-1069

1.

2.

3012-1095

English - 73

Page 75
Image 75
Husqvarna 320, 330X manual Transport and moving, Event of a thunderstorm, Chassis, Wheels, Body