English - 35
USE
4.4 Stopping
1. Press the STOP button.
The robotic lawnmower stops, the blade motor
stops and the control panel hatch opens.
4.5 Switching off
1. Press the STOP button.
2. Set the main switch to position 0.
Always switch the robotic lawnmower off using the
main switch if it requires maintenance or if the robotic
lawnmower must be moved outside the working area.
Adjusting the cutting height
The cutting height can be varied from MIN (2 cm) to
MAX (6 cm) in nine stages.
During the rst week after a new installation, the cutting
height must be set to MAX to avoid damaging the loop
wire. After this, the cutting height can be lowered one
step every week until the desired cutting height has been
reached.
If the grass is long, allow the robotic lawnmower to start
mowing at the MAX cutting height. Once the grass is
shorter, you can gradually lower the cutting height.
To adjust the cutting height:
1. Press the STOP button to stop the robotic
lawnmower and open the hatch.
2. Press the MENU button to access the main menu.
3. Move the cursor using the arrow keys to select
Cutting height.
• Press the up arrow key to increase the cutting
height.
• Press the down arrow key to lower the cutting
height.
4. Press OK.
IMPORTANT INFORMATION
During the rst week after a new installation,
the cutting height must be set to MAX to
avoid damaging the loop wire. After this, the
cutting height can be lowered one step every
week until the desired cutting height has been
reached.
3012-1044
3012-1060
3012-1237