MENU FUNCTIONS
Charging station range
There may be reasons to reduce the range of the charging station in rare cases. It may be necessary if for instance the charging station is placed close to a bush or wall which prevents the robotic lawnmower from docking with the charging station despite making contact with the charging station’s signals. In these cases, it is normally better to move the charging station, but if this is not possible, the range of the charging station can be reduced.
Use the left and right arrow keys to select range.
Setting | Range |
Min | 0 m |
Average | approx. 3 to 4 m |
Max | approx. 6 to 8 m |
IMPORTANT INFORMATION
The charging station’s range must only reduced in exceptional cases. It is normally better to move the charging station to a better place in the working area.
Overview
This function summarises the selected settings for each search method. It is also possible to test that the robotic lawnmower can follow the guide wires and the boundary wire to the charging station and dock with it without a problem.
Overview > Test
Testing selected settings can be seen as a natural part of the installation.
To test the selected settings:
1.Place the robotic lawnmower about 3 metres from the wire to be tested (boundary wire or one of the guide wires), facing the wire.
2.Use the right/left arrow key to select Test under the wire to be tested. Press OK.
3.Press START and close the display hatch.
Check that the robotic lawnmower follows the guide wire all the way to the charging station and that it docks with the charging station. The test is approved only if the robotic lawnmower is able to follow the guide wire the entire distance to the charging station and docks at the first attempt.
If the robotic lawnmower is unable to dock on the first attempt, it will automatically try again.
The installation is not approved if the robotic lawnmower needs two or more attempts to dock with the charging station.
English - 51
