English - 61
MENU FUNCTIONS
ECO
This function automatically turns off the loop signal in the
boundary loop, the guide wires and the charging station
when the robotic lawnmower is not mowing, i.e. when the
lawnmower is charging or is not allowed to mow due to
timer settings.
ECO is suitable to use where there is other wireless
equipment not compatible with the robotic lawnmower
e.g. certain hearing loops or garage doors.
When the loop signal is turned off due to the ECO mode,
the indicator lamp in the charging station ashes green.
When the indicator lamp ashes green the robotic
lawnmower can only be started in the charging station
and not out in the working area.
In ECO mode, it is very important to always press the
STOP button before removing the robotic lawnmower
from the charging station. In ECO mode it is otherwise not
possible to start the robotic lawnmower. If the lawnmower
has been removed by mistake without rst pressing the
STOP button, the lawnmower must be placed back in the
charging station and the STOP button pressed. Only then
can the robotic lawnmower be started inside the working
area.
IMPORTANT INFORMATION
Always press the STOP button before
removing the robotic lawnmower from the
charging station. In ECO mode the robotic
lawnmower otherwise will not be started
inside the working area.
Select Run ECO and press OK to activate ECO mode.
Spiral cutting
If the robotic lawnmower enters an area where it senses
the grass is longer than average, it can change the
movement pattern. It can then mow in a spiral pattern
to faster cut the area of longer grass.
Spiral cutting
To activate spiral cutting use the up arrow key to select
On.
3012-1218
3012-1256