English - 56
MENU FUNCTIONS

Advanced

Under the Advanced heading, there are even more
settings relating to the behaviour of the robotic
lawnmower. The settings in this menu are only required
if additional control of the lawnmower is denitely needed
e.g. in very complex gardens. The factory settings are
selected in way that should suit most working areas.
Corridor width
The corridor width is a measure of how far from the guide
wire/boundary wire the robotic lawnmower is allowed to
travel when it follows this to and from the charging station.
The area beside the wire which the robotic lawnmower
then uses is called the Corridor.
The aim of operating at varying distances from the wire
is reduce the risk of tracks forming. To reduce the risk
of tracks forming, it is recommended to select the widest
corridor possible allowed by the size of the working area.
The robotic lawnmower itself adjusts the corridor width
according to the size of the working area when following
along a guide wire. The inbuilt automatic mechanism
allows the robotic lawnmower to vary the distance from
the wire depending on where in the working area it is
located. It automatically makes the corridor narrower in
narrow passages for instance.
The factory settings can be used for many working
areas, i.e. the robotic lawnmower itself can use the inbuilt
functions to operate in the widest possible corridor.
In more complex gardens e.g. where the guide wire is
placed close to obstacles which cannot be isolated using
the boundary loop, operational safety can be improved by
carrying out some of the manual settings outlined below.
Corridor width > Boundary
Corridor width is specied in intervals from 1-9. The rst
number in the interval species the shortest distance to
the boundary loop and the second number the longest
distance.
The distance the robotic lawnmower maintains from
the boundary loop varies depending on the layout of
the working area. Use the Test function in Installation >
Lawn Coverage > Overview to test the different values.
Use the number keys to specify the required interval.
The factory setting is 9.
3012-1076
3012-1216
3012-1250
3012-1249