INSTALLATION
3.7 Checking the installation
Check the loop signal by inspecting the indicator lamp on the charging station.
• Solid green light = good signals.
• Flashing green light = the loop system is turned off and the robotic lawnmower is in ECO mode. See 6.9 Settings on page 59.
• Flashing blue light = interruption in the boundary loop, no signal.
• | Flashing red light = interruption in the charging |
|
| station’s antenna plate. The fault should be rectified |
|
| by an authorised dealer. |
•Solid blue light = weak signal. This may depend on the boundary loop being too long or that the wire is damaged. If the robotic lawnmower still works, this is not a problem.
•Solid red light = fault in the circuit board in the charging station. The fault should be rectified by an authorised dealer.
See 9.3 Indicator lamp in the charging station on page 79 if the lamp does not indicate a solid or flashing green light.
English - 31
