MENU FUNCTIONS
6.9 Settings
This selection allows you to carry out changes to the robotic lawnmower’s general settings.
Settings
Profiles | ECO | Spiral | Time & | Language Country | Cutting | Guide wire | Reset | |
| mode | cutting | date |
| height | calibration | all user | |
|
|
|
|
|
| calibration |
| settings |
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
On/Off Intensity
On/Off
Set time | Set date Time format Date format |
Use Change name Save
Profiles
With the function Profiles, different sets of user settings can be saved. This means that the settings can be easily stored and reused if the robotic lawnmower for example will be used in different gardens. Up to three different profiles can be stored.
Save settings to a Profile
•First make the settings in the mower that will be stored in the profile.
•Check Enable Profiles and press OK.
•Check the profile to be stored, move the cursor with the up and down arrow keys.
•Press OK.
•Check Save and press OK, followed by arrow key left and OK. All user settings are now stored in the selected profile.
•If settings that are not stored to the profile are made, the symbol * is shown next to the profile name.
English - 59 |
