PRESENTATION
2 Presentation
This chapter contains information that is important to be aware of when planning the installation.
Installing a Husqvarna robotic lawnmower involves four main components:
• A robotic lawnmower that mows the lawn by essentially operating in a random pattern. The robotic lawnmower is powered by a
•A charging station, to where the robotic lawnmower automatically returns when the charge level in the
battery becomes too low.
The charging station has three functions:
• To send control signals along the boundary wire.
• To send control signals along the guide wire so that the robotic lawnmower can find the charging station.
•To charge the battery in the robotic lawnmower.
•A transformer, which is connected between the
charging station and a
A longer low voltage cable is available as optional accessory. Please contact your dealer for more information.
•A loop wire, laid in a loop around the robotic lawnmower’s working area. The loop wire is laid around the edges of the lawn and around objects and
plants that the robotic lawnmower must not run into. The loop wire is also used as the guide wire.
The wire supplied for the installation is 400 m long (250 m for Automower® 320). If this is not sufficient, more wire can be purchased and spliced onto the existing wire with a coupler.
The maximum permitted length for the boundary loop is 800 m.
English - 9
