VEHICLE PREPARATION

1)Decide on the system configuration and the options that will be installed.

2)Read the manuals and get familiar with the electrical requirements and connections.

3)Decide on the mounting locations and methods of mounting the products that will be connected to the AVXMTGHR1M.

4)Prepare the vehicle by removing any interior trim necessary to gain access to the vehicle's wiring as well as all areas where interconnecting wire harnesses will be located. The mounting method, and the location will vary from vehicle to

vehicle, so this manual will only focus for the installation of the AVXMTGHR1M Monitors in the supplied configuration. The best location for the AVXMTGHR1M

System components is:

a. Monitors: Vehicle specific Headrest NOTE: The Master Monitor should be installed in the passenger position most used.)

5) Locate an accessory power source (+12VDC present when the ignition key is in

the accessory and run positions. 0VDC should be present when the ignition key is in the OFF position), a constant power source (+12VDC) at all times,

regardless of the ignition key and a good ground. Generally, these wires can be found at the ignition switch or fusebox.

NOTE: Ensure that both the constant and accessory power is fused at the source. Failure to do so may result in vehicle wiring damage.

6)Run the wiring harnesses throughout the vehicle as necessary. (Refer to the Wiring Diagrams on page 7, as well as the wiring instructions for the individual components and accessory options being installed). Be sure, that all the wiring is protected from sharp edges and is routed in such a manner that it will not be pinched, when it is fully installed. Be sure to leave enough slack in the wiring at each component to allow sufficient working room. Be sure to leave enough slack in the monitor cables to allow the headrest to move up or down, and seat movement.

7)Remove all the A/V system components from their packaging and then place them in the vehicle at their respective locations.

8)Install the headrests:

a.Remove vehicle's original headrests.

b.insert appropriate support tube adaptors in vehicle post guides. (if needed)

c.Hold the headrest above the seat and insert the two cables into the vehicle support guides Make sure that the headrest is in the correct position (Display facing the rear).

d.Route the cables through the seat back and out the bottom of the seat while pulling the cables to remove the slack. Be sure to leave enough slack in the monitor cables to allow the headrest to move up or down.

9)Connect all the components together (electrically) and verify proper operation of all the system functions.

6

AVXMTGHR1M

Page 5 Page 7
Page 6
Image 6
Audiovox AVXMTGHR1M operation manual Vehicle Preparation
Page 5 Page 7

AVXMTGHR1M specifications

The Audiovox AVXMTGHR1M is a versatile and robust mobile entertainment solution designed for various applications, ideal for passengers in cars, RVs, or campers. This high-performance roof-mounted overhead monitor integrates advanced technology to deliver an impressive viewing experience on the go.

One of the standout features of the Audiovox AVXMTGHR1M is its 17.3-inch widescreen display. With an impressive resolution, this monitor provides bright and clear visuals, ensuring that all content appears vibrant and lifelike. The large screen size allows for a more immersive viewing experience, making it perfect for watching movies, gaming, or enjoying live television, which transforms any trip into an entertaining adventure.

The Audiovox AVXMTGHR1M supports multiple media formats, including DVDs, CDs, USB drives, and SD cards, giving users flexibility in how they consume content. Its built-in DVD player allows for easy access to favorite movies, while the USB and SD card slots enable playback of media files without the need for additional equipment. This multifunctionality ensures that there is always something to enjoy, regardless of the type of media available.

Audio quality is also a significant consideration in this system. The AVXMTGHR1M is equipped with built-in stereo speakers that deliver clear and rich sound, making audio experiences just as engaging as the visuals. Additionally, it comes with wireless infrared headphones compatibility, allowing passengers to enjoy audio without disturbing others.

The monitor features an integrated IR transmitter that facilitates seamless audio streaming to wireless headphones. This ensures a personalized listening experience, especially valuable during long journeys.

User-friendly controls and a remote control enhance the user experience, allowing passengers to navigate through media effortlessly. The Audiovox AVXMTGHR1M also includes a remote that provides easy access to various functions from the comfort of a seat, making it user-friendly for individuals of all ages.

Overall, the Audiovox AVXMTGHR1M combines quality, functionality, and modern entertainment technology, making it an exceptional choice for anyone looking to enhance their mobile viewing experience. With its ample features tailored for multimedia enjoyment, this overhead monitor stands out as a staple in mobile entertainment solutions.
Top Page Image Contents