INSTALLATION AND HOOK-UP

1. Cut mounting hole in desired location using mounting hole diagram (right).

2.Route power, speaker, and antenna cables through hole and connect to unit as shown below.

3.After making sure connections are correct, test unit operation as described in operation section.

4.For best AM reception, AM trimmer must be adjusted.

12 PIN FEMALE CONNECTOR WIRING COLOR CODE

FOR AWM-710

COLOR

FUNCTION

ORANGE/WHITE

+12VDC IGNITION HOT

BLACK/WHITE

GROUND

WHITE

A SPEAKER LEFT (+)

VIOLET

A SPEAKER LEFT (-)

BLUE

A SPEAKER RIGHT (+)

LIGHT GREEN

A SPEAKER RIGHT (-)

RED

B SPEAKER LEFT (+)

VIOLET/BLACK

B SPEAKER LEFT (-)

YELLOW

B SPEAKER RIGHT (+)

LT.GREEN/BLACK

B SPEAKER RIGHT (-)

Notes:

-When hooking up two speakers, hook A+ and A- speaker wires to speaker select A speaker on switch. A & B and B will not have any output at this time.

-B speakers are optional

-Speakers must have a minimum of four ohm impedance each.

-Either antenna may be used. Both do not have to be hooked up at the same time.

-Do not operate this unit with only one speaker hooked up. If a speaker fails, replace it before operating this unit.

NOTE: Always be sure when running cables to avoid sharp edges, extreme heat sources, and any other potential hazards. 2

Page 4
Image 4
Audiovox AWM-710 owner manual Installation and HOOK-UP

AWM-710 specifications

The Audiovox AWM-710 is a robust and versatile wireless audio system designed to deliver high-quality sound in a variety of settings. This system is particularly well-suited for home theaters, outdoor gatherings, or even for personal audio experiences, thanks to its adaptability and user-friendly features.

At the core of the AWM-710 is its ability to transmit audio wirelessly, allowing users to place the speakers at their preferred locations without the constraints of cables. This wireless capability is facilitated through advanced radio frequency technologies, ensuring a reliable connection that minimizes interference while maximizing sound fidelity. The system operates on the 2.4 GHz frequency band, which is known for its stability and range, making it ideal for both indoor and outdoor use.

The AWM-710 boasts a sleek and modern design, with an intuitive interface that makes it accessible to users of all skill levels. It includes notable features such as a built-in digital amplifier, which enhances sound clarity and power without distorting the audio output. The sound quality is further elevated by the incorporation of advanced signal processing technologies, providing users with a rich listening experience that encompasses the full range of audio frequencies.

Another key aspect of the Audiovox AWM-710 is its compatibility with various audio devices. It comes equipped with multiple input options, including 3.5mm auxiliary input, RCA connections, and Bluetooth capability. This versatile connectivity allows users to seamlessly connect their smartphones, tablets, or other audio sources, making it easy to stream music or watch movies with enhanced sound.

The system also features an easy-to-use remote control, giving users the ability to adjust volume, switch tracks, and navigate through their audio content from a distance. The portability of the AWM-710 is another highlight; it is lightweight and can be easily moved from room to room or taken outdoors, ensuring that high-quality audio is always within reach.

In summary, the Audiovox AWM-710 is a standout wireless audio solution that combines modern technology with user-centric design. Its wide range of features, including wireless transmission, multiple input options, and superior sound quality, make it a preferred choice for those seeking convenience and excellence in their audio experiences. Whether for personal enjoyment or hosting gatherings, the AWM-710 delivers unmatched performance and versatility, setting a high standard in wireless audio technology.