BATTERYINSTALLATION
BATTERYSAVER MODE
Your FR-240 has a unique circuit designed to dramatically
extend the life of its batteries. After five seconds of inactivity,
the FR-240 will switch to battery saver mode. The transceiver
willremain ready to receive any incoming transmissions while in
thebattery saver mode. Pressing any of the buttons will exit the
batterysaver mode.
-5-
Incorrectbattery installation can damage the unit.
The microphone / charger jack is intended for use with Audiovox
approved charging accessories only. Refer to the documentation
includedwith the battery charger.
Neverattempt to charge alkaline batteries with the optional battery
charger.
CAUTION:
YourFR-240 requires four “AAA” alkaline cells or
four rechargeable “AAA” cells. Alkaline batteries
will provide the best performance from your
transceiver. Remove the battery cover by
rotating the belt clip away from the battery
compartment. Slide the battery cover
downwardwhile applying pressure at its grooved
section. Observe the polarity symbols inside the
batterytray when installing the batteries.