ELIMINATING/RETURNING THE NORMALARM/DISARM CHIRPS
You can selectively eliminate the normal arm & disarm chirps using the valet/ override switch, following these steps.
1.Turn the ignition key ON the OFF.
2.Within 10 seconds of turning the ignition key OFF, press and release the valet/override switch 3 times.
3.If, before step 1, the chirps were ON, then you will hear 2 short chirps, which indicates the chirps are turned OFF.
4.If, before step 1, the chirps were OFF, then you will hear 1 short chirp, which indicates the chirps are turned ON.
5.Whenever the system's power has been disconnected, the chirps will be ON when power is reconnected.
SYSTEM FUNCTIONS AT A GLANCE
ALARM DASH LED INDICATORS |
| |
RAPID FLASHING | = | PASSIVEARMING |
SLOW FLASHING | = | ARMED |
OFF | = | DISARMED |
ON SOLID | = | VALET MODE |
4 FLASH...PAUSE | = | INTRUSION SHOCK SENSOR |
3 FLASH...PAUSE | = | INTRUSION DOOR |
2 FLASH...PAUSE | = | INTRUSION HOOD OR TRUNK |
ALARM SIREN CHIRP INDICATION
1 | CHIRP* | = | ARM |
2 | CHIRPS* | = | DISARMED |
3 CHIRPS | = | ARMING WITH ENTRY POINT OPENED | |
4 CHIRPS | = | DISARM AFTER INTRUSION | |
CONTINUOUS | = | ALARM TRIGGERED | |
ALARM PARKING LAMP INDICATIONS
1 FLASH | = | ARM |
2 FLASH | = | DISARM |
3 FLASH | = | DISARM AFTER INTRUSION |
CONTINUOUS FLASH | = | TRIGGERED |
ca3051 rev B. 2011Audiovox Electronics Corporation. All rights reserved.
