Hitachi CP-X3020 user manual Operating, Adjusting the volume, Temporarily muting the sound

Operating

Operating

Adjusting the volume

VOLUME +/- button

1. Use the VOLUME +/VOLUME - buttons to adjust the volume. A dialog will appear on the screen to aid you in adjusting the volume. If you do not do anything, the dialog will automatically disappear after a few seconds.

MY SOURCE/

VIDEO COMPUTER DOC.CAMERA

ASPECT AUTO SEARCH BLANK

MAGNIFY FREEZE PAGE VOLUME UP

ON

DOWN

● When is selected for current picture input port, the volume	OFF
	KEYSTONE	MY	BUTTON	MUTE
			1 2
adjustment is disabled. Please see AUDIO SOURCE item of
AUDIO menu ( 38).	POSITION			MENU

●Even if the projector is in the standby state, the volume can be adjusted when both of following conditions are satised.

-NORMAL is selected for the STANDBY MODE in the SETUP menu (37).

-An item other than is selected for the AUDIO OUT STANDBY of the AUDIO SOURCE in the AUDIO menu (38).

Temporarily muting the sound

1. Press MUTE button on the remote control.

A dialog will appear on the screen indicating that you have muted the sound.

To restore the sound, press the MUTE, VOLUME + or VOLUME - button. Even if you do not do anything, the dialog will automatically disappear after a few seconds.

MUTE button

MY SOURCE/

VIDEO COMPUTER DOC.CAMERA

ASPECT AUTO SEARCH BLANK

MAGNIFY FREEZE PAGE VOLUME UP

ON

DOWN

OFF

KEYSTONE MY BUTTON MUTE

1 2

●When is selected for current picture input port, the sound

is always muted. Please see AUDIO SOURCE item of	POSITION	MENU
AUDIO menu ( 38).

●C.C. (Closed Caption) is automatically activated when sound is muted and an input signal containing C.C. is received. This function is available only when the signal is NTSC for VIDEO or S-VIDEO, or 480i@60 for COMPUTER IN1 or COMPUTER IN2, and when AUTO is selected for DISPLAY in the C.C. menu under the SCREEN menu (44).

Selecting an input signal

1.	Press INPUT button on the projector.			INPUT button
	Each time you press the button, the projector switches its
	input port from the current port as below.
	COMPUTER IN1 Æ COMPUTER IN2
	VIDEO	Æ	S-VIDEO

●While ON is selected for AUTO SEARCH item in OPTION menu (45), the projector will keep checking the ports in above order repeatedly till an input signal is detected.

(continued on next page)

16