Hitachi CP-X3020 user manual Connecting your devices, VCR/DVD/Blu-ray Disc player

Connecting your devices

Be sure to read the manuals for devices before connecting them to the projector. Make sure that all the devices are suitable to be connected with this product, and prepare the cables required to connect. Please refer to the following illustrations to connect them. To input component video signal to COMPUTER IN1/2 port, please see the “Operating Guide” in the CD.

ENGLISH

Monitor

PC

RGB IN

AUDIO OUT

RGB OUT

AUDIO OUT

RGB OUT USB RS-232C

S-VIDEO OUT	L	R	VIDEO OUT	L	R	L	R	Y	CB/PB CR/PR
	AUDIO OUT			AUDIO OUT		AUDIO OUT		COMPONENT VIDEO OUT

VCR/DVD/Blu-ray Disc player

LR

AUDIO IN

Speakers

(with an

amplier)

WARNING ►Do not disassemble or modify the projector and accessories. ►Be careful not to damage the cables, and do not use damaged cables.

CAUTION ►Turn off all devices and unplug their power cords prior to

connecting them to projector. Connecting a live device to the projector may generate extremely loud noises or other abnormalities that may result in malfunction or damage to the device and the projector.

►Use appropriate accessory or designated cables. Ask your dealer about non- accessory cables which may be required a specic length or a ferrite core by the regulations. For cables with a core only at one end, connect the end with

the core to the projector.

►Make sure that devices are connected to the correct ports. An incorrect

connection may result in malfunction or damage to the device and the projector. NOTICE ►Use the cables with straight plugs, not L-shaped ones, as the input

ports of the projector are recessed.

7