Audiovox CDM9100 manual Gettingi Started

Models: CDM9100

1 107
Download 107 pages 62.34 Kb
Page 24
Image 24

GETTINGI STARTED

Turning the Phone On/Off

Press and hold . All the indicators and the display will light momentarily, and a tone will be heard. The indicator will be displayed while the phone is turned on.

To turn the phone off, press and hold .

Antenna Position

The antenna can be used in its fully extended or fully re- tracted position only. It is recommended that the antenna should be fully extended for optimum performance and signal strength or while operating in poor signal areas.

Receiving Signal Strength Indicator ()

The number of lines indicates the Signal Strength in your area. Four lines show the maximum level. The dis- play will vary as you move with the phone. If the signal is not strong enough to place a call, “” will appear on the LCD display.

Battery Level Indicator

You can always monitor the battery charge condition with the constant battery level indicator. The number of blocks indicates the battery conditions as follows:

Full charge

Low charge

Flashing indicates discharged.

Power Management

Battery

Mode

Talk Time

Standby Time

up to

up to

 

 

Lithium Ion

Digital

170 min.

170 h

(BTR-9100)

 

 

 

Analog

60 min.

15 h

 

 

 

 

The operating times are approximate values and may

vary depending on network configuration and handset

usage.

24

Page 24
Image 24
Audiovox CDM9100 manual Gettingi Started