Audiovox CE-3100, CE-200, CE-300, CE-100 manual Cab Wirng, Housing Wiring

Cab Wiring

I. Route pre-installed antenna lead to mounting plate for connection to radio later in installation.

2.Locate the two wire (Red and Black) harness and the single Green/White stripe harness in this kit.

3.Connect the Black wire to vehicle ground using the crimp-on ring terminal and screw included.

4.Splice the Red wire to any + 12 volt accessorywire in the cab using the quick splice included.

5.Splice the Green /White stripe wire to any + 12 volt battery source in the cab using the quick splice connector included.

6.Route all three wires to the radio mounting plate for later connection.

(

FIG. 5 CAB WIRNG

CRIMP-ON

RINGTERMINAL

QUICKSPLICE~

CONNECTOR

/"

GREEN/WHITEWIRE

TO +'12 VOLTBATTER~ (ONLYON CE100/200/300)

RADIOMOUNTINGPLATE

Housing Wiring:

I. Connect 2-pin Red/Black plug to mating 2-pin plug.

2. Connect Green/ White wire to mating Green/White wire.

REDTD +12 VOLTACC.

~

BLACK ~ "'

TO VEHICLE ,,"

GROUND ~

~;

RED GREEN/WHITE FIG. 6 HOUSING WIRING

1,,--:

BLACK/~ I

~	GREEN/WHITE
	ONLYON CE10012001300
	RED

~

/

BLACK

REAROF HOUSING