Audiovox CE105 manual AM/FM Band Selector Band, Automatic Seek Tuning

characteristics of human hearing.		Press the LOUD button		Pressing and holding either side of the button for longer than 0.5
momentarily to activate this feature and the indication LOUD will				second will cause the radio to continue tuning rapidly in the
appear on the display panel. Pressing the button again				selected direction until the desired station is reached. Tuning in
momentarily will deactivate the feature (the LOUD indication will				the same direction will continue unless the button is released at
disappear	from the display panel).			the desired station. Pressing either side of the button during
9 AM/FM BAND SELECTOR (BAND)				disc play permits rapid selection of a desired track on the disc in
				the respective direction.
During radio operation, each time this button is pressed, the radio				bm MUTE (M) SELECTION
band is changed. The indication AM 1, AM 2, FM 1, FM 2 or
FM 3 will appear on the display panel according to your selection.				Press the M (MUTE) button momentarily to mute the volume
During disc play, pressing this button will stop play of the disc				from the system (MUTE will appear on the display panel).
and switch to radio operation. The disc will remain in the machine				Pressing the button again, or selecting another function, will return
without being ejected. During this time, the			icon will remain	to the volume level setting in use before the MUTE function was
lit on the display panel to show that a disc is still loaded in the				activated.
unit. Press the MODE button to return to disc play from the				bn MONO/STEREO SELECTION
beginning of the last track in play.
When FM reception is weak and/or AM 1 or AM 2 is selected, the				During FM radio operation, when the signal is broadcast in
stereo (	) indication will disappear from the display.
				stereo, the stereo mode is indicated by the	icon on the
bl MANUAL UP/DOWN TUNING, TRACK SELECT, AND				display panel. If the stereo signal is too noisy for comfortable
				listening, or if the FM signal is broadcast in monaural instead of
AUTOMATIC SEEK TUNING (		/	)	stereo, the indication disappears from the display. When a
To manually select a radio station, momematrily press the Up				station on either AM band is selected, no stereo indication is
Tuning (	) side of the button to advance the unit two digits			present on the display.
higher or the Down Tuning ( ) side of the button to tune two				bo PRE-SET SCAN (PS) / AUTO-STORE TUNING (AS)
digits lower.
Pressing either side of the button for longer than 0.5 second and				Press this button momentarily to scan the stations pre-set into
then releasing will activate the Automatic Seek Tuning function.				each AM band and each FM band. The unit will stop at each
The radio will seek the next station in the selected direction and				pre-set station for approximately 8 seconds before continuing to
stop and remain at that frequency.				the next pre-set station (the pre-set station number on the display
			-5-