Audiovox CE105 manual Cd Changer Controls, ct CD CHANGER SELECTION, cu DISC SELECT DISC - /DISC +

Models: CE105

1 16
Download 16 pages 63.82 Kb
Page 11
Image 11
CD CHANGER CONTROLS

CD CHANGER CONTROLS

Built into this radio are controls to operate an optional CD changer. Please check with your Prestige/Audiovox car stereo specialist or call 1-800-645-4994 for recommendations of the models that will work with this radio.

Adjustment of the audio functions (volume, tone, balance, and fader) for the CD changer operate in the same manner as they do for radio play. The following controls will operate the CD changer when it is installed and connected to this radio. Refer to the owner’s manual included with the CD changer for instructions on the installation and correct loading and use of the CD magazine.

ct CD CHANGER SELECTION

During CD play, press the MODE button to select operation of the CD changer as shown by the CDC display, followed by the track indication (T 01, etc.) and DISC number (01, etc.). Note that the ct CD CHANGER SELECTIONcu DISC SELECT (DISC - / DISC +)dl TRACK SELECT ( / )dm CUE/REVIEW FUNCTIONS ( / ) symbol now changes to indicate a multiple disc changer source,

as opposed to the CD player single CD symbol ( dn TRACK/DISC SCAN SELECTOR (SCAN)Manual backgroundManual backgroundManual background ). Disc play will then begin. If a new magazine has been loaded into the changer, play will begin from the first track of the first disc in the magazine. If a magazine was already in the changer, play will resume from the track on the disc previously in play. When the MODE button is pressed again, operation reverts to the CD player (from the first track on disc).

cu DISC SELECT (DISC - / DISC +)

During changer operation, disc select is accomplished by pressing the DISC - or DISC + button. Each time the button is pressed, play advances

to the next higher or lower disc, and the disc number (01, etc.) is displayed on the front panel. In this manner, the desired disc can be quickly accessed.

dl TRACK SELECT (Manual background / Manual background)

The Track Select functions are used to quickly access the beginning of a particular track. Each time the Forward Track Select ( Manual background) side of the button is pressed, the next higher track number will be selected as shown on the display panel. Similarly, each time the Backward Track Select (Manual background ) side of the button is pressed, the next lower track number will be selected as shown on the display panel.

dm CUE/REVIEW FUNCTIONS (Manual background / Manual background)

High-speed audible search to any section of the disc can be made by the Cue and Review functions. Press and hold the Cue ( Manual background) side of the button to advance rapidly in the forward direction (the disc play symbol will quickly rotate forward on the display panel) or the Review (Manual background ) side of the button to advance rapidly in the backward direction (the disc symbol will quickly rotate backwards on the display panel).

dn TRACK/DISC SCAN SELECTOR (SCAN)

When the SCAN button is pressed, the SCAN indication will appear on the display panel, and the first 10 seconds of each track on the disc will be played in order. The scan function will continue in this manner until a desired track is reached, or the scan function is halted by pressing the SCAN button again (play of the selected track will continue and SCAN will disappear from the display panel). The Track Scan mode will also be canceled by activating the Repeat Play, Shuffle Play, or Track Select functions.

-11-

Page 11
Image 11
Audiovox CE105 manual Cd Changer Controls, ct CD CHANGER SELECTION, cu DISC SELECT DISC - /DISC +, dl TRACK SELECT