LCD DISPLAY INFORMATION
When power on, CD lid is closed: CD Disc MP3 Disc
If disc is in, starts CD reading.
If no disc
Other un-recognized CD format discs.
NOTE: On rare occasions, the unit may display <Can Not Read> or <READING
DISC> or other messages. This condition is caused by a CD with an unrecognized
format. If the player is unresponsive or appears to be locked up, simply open the
CD door, remove the CD and replace with a CD containing a supported format.
6
CLEANING DISCS
Finger prints should be carefully wiped from the
surface of the disc with a soft cloth. Unlike
conventional records, compact discs have no grooves
to collect dust and microscopic debris, so gently
wiping them with a soft cloth should remove most
particles. Wipe in a straight motion from the center
to the edge.
Never use thinner, benzine, record cleaner or anti-static spray on a compact
disc. Such chemicals can damage its plastic surface.
BASIC DISC PLAY
1. Connect the headphones to the PHONES (GREEN) socket.
2. Press the OPEN button to open the CD compartment lid.
3. Adjust the VOLUME to desired the sound level.
4. Insert the disc with the label side facing up.
5. Close the lid securely until a click is heard.
6.Press the PLAY button to start playing.
To Emphasize the bass sound
Set the BASS BOOST switch to the ON position.
Note: The bass boost performance will be dependant on the VOLUME
control setting.
-During play or stop mode, by sliding this switch, a <BASS ON> or <BASS OFF>
message will be displayed.
HOLD Switch
This switch prevents accidental selection of an unwanted
function during playback or stop mode. In the HOLD "ON"
position, no function button on the unit can operated (except
OPEN). Moving the switch to the "OFF" position, the unit
returns to normal operation.
During play or stop mode, by sliding this switch, a <HOLD ON> or <HOLD OFF>
message will be displayed.
If the player is turned on when the HOLD feature is activated, the screen will
display a <KEY HOLD> and <Good Bye> message. The unit will then power
down automatically.
Turning Power on and off
This unit has no ON/OFF switch. To turn on and off, press the following buttons.
To turn on: Press PLAY/PAUSE (playback starts).
To turn off: Press STOP button once to standby mode.
If press STOP button twice, it will turn off the power immediately.
Auto power-off function
When the unit is stopped (standby mode) for approximately 30 seconds, the power
is automatically turned off.
7
BASS BOOST
ON OFF
HOLD
WelcomeWelcome
READING DISC
A:005 T : 123
CD ESP
00:01
track 01 T : 17
Auto Play
< NO DISC ! >
< NO DISC ! >
Auto Play
Good Bye
Good Bye
POWER OFF POWER OFF
No Disc No Disc
Elasped time
for current track
Current track Total track Total Album Total track
< NO TRACK >
< NO TRACK >
MP3 ESP
001 00:15
SONG TITLE
Current Track Elasped time
for current track